Matt Rasmussen
Advanced user
Всего сообщений: 107
Дата регистрации: 25.05.2008
|
Создано:
01.07.2009 14:00:35
|
I have a problem that I cannot seem to make an exclusion to fix. The programming utility is located .
Once you install that program, follow the steps below to see the error.
1) Create a new project, click file|new
2) Select the 'CS' button just above the 'untitled 1' window tab, then click on the work space to place the object.
3) Select Presets|Create/Edit/Recall.
When that window opens, two buttons appear at the top left of the program window that should be attached to the bottom and right edge of the Create/Edit Preset window. Press one of these buttons and you can see the issue. Even if you press the move to next monitor tool funky things happen (only with the Create/edit Preset window open).
The program works fine without AWM running.
Thanks!
Matt
|
Alexey Fadeyev
Администратор
Moderator
Всего сообщений: 1436
Дата регистрации: 30.09.2005
|
Создано:
06.07.2009 22:29:57
|
Matt, we tried to reproduce this error on our test machine but, though following exactly the described steps, we failed. It looks like there's some 3rd party causes the subject issue. Please could you check this guess? Thank you!
|
Matt Rasmussen
Advanced user
Всего сообщений: 107
Дата регистрации: 25.05.2008
|
Создано:
07.07.2009 20:18:36
|
I don't know, I disable AWM and it works fine, I enable it and it doesn't...not sure what else could be doing it. Plus, I don't use any other tool type program other than AWM, it does everything I need.
|
