Actual Tools
Логотип Actual Tools
 ГЛАВНАЯ 
 ПРОДУКТЫ 
 СКАЧАТЬ 
 КУПИТЬ 
 ПОДДЕРЖКА 
 КОМПАНИЯ 
Actual Tools
Новости в формате RSS Новости
Главная / Форумы / Technical Support
Список форумов
Новые темы
Список тем
Поиск по форумам
Помощь
Войти
Регистрация


Тема: «monitor placement/number is wrong » в форуме: Technical Support   Просмотров: 4957
 
Scolex
 
Всего сообщений: 10
Дата регистрации: 02.10.2008
Создано: 07.06.2010 01:21:17
 
 
I recently had to send a monitor off for repair and now that I have it hooked up again the monitor placement is the opposite of what it should be.
I did a uninstall/reboot/install and it didn't fix it.
Also searched the registry but could not find a setting to change, not exactly sure what to look for though.
Windows 7 home premium x64
AWM 6.1
Any ideas?

Пользователь добавил изображение
 
Наверх
Scolex
 
Всего сообщений: 10
Дата регистрации: 02.10.2008
Создано: 17.06.2010 03:18:46
 
 
I don't know what the specific problem was but I do know it was not isolated to AWM. A day or 2 later I installed Stardock's Object Dock Plus v2 and it suffered from a similar problem.
What I did to remedy the problem was:

  1. Uninstall secondary monitor and video card drivers in device manager
  2. shutdown
  3. disconnect secondary monitor
  4. turn comp back on install VC drivers
  5. restart
  6. shut down
  7. connect secondary monitor
  8. start and check (shown correctly)

This is just a guess but I assume that in win7 the monitor designation is in a new place and the prog' is looking in the wrong place or at the wrong info. I would have thought that just switching the cables would have solved this but it didn't, this tells me that the prog' or win is reading/writing something that is hardware specific similar to a mac address for a NIC.
 
Наверх
chgoguy7
 
Всего сообщений: 90
Дата регистрации: 28.02.2006
Создано: 13.07.2010 13:30:36
 
 
I am experiencing this same issue. Do Actual Tools technical leads have any insight or feedback on this issue and its resolution? Since this directly impacts some basic functions of AWM, it is important that the monitors are identified correctly.
 
Наверх
Jim Fraley
 
Всего сообщений: 32
Дата регистрации: 14.08.2007
Создано: 09.09.2010 15:50:56
 
 
I have experienced the same issue when setting up the background image options.  For that, I just swapped the locations so the wallpaper appeared on the correct monitor.  For other setting, this may be a bigger issue.
 
Наверх
Tatiana Jack
Администратор
-retired-
 
Всего сообщений: 616
Дата регистрации: 06.08.2008
Создано: 10.09.2010 04:14:11
 
 
We are working to solve the problem.

E-mail: support@actualtools.com
 
Наверх


Читают тему
гостей: 1, пользователей: 0, из них скрытых: 0


Список форумов
Новые темы
Список тем
Поиск по форумам
Помощь
Войти
Регистрация